| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-2
2-171. FLOODLIGHT.
The floodlight is installed on the winds-held overhead. The type and installation varies depending on the vessel.
2-172. EXHAUST STACKS - REMOVAL/INSTALLATION.
a. To remove the exhaust stacks, proceed as follows:
(1) Remove four cap head screws (1).
(2) Remove insulation tape (2).
(3) Remove exhaust stack (3).
(4) Remove nuts (4) and screws (5).
(5) Lift exhaust pipe (6) and slip flange (7) from flange.
(6) Remove gasket (8).
(7) Remove nuts (9) and screws (10).
(8) Lift exhaust pipe (11) and slip flange (12) from flange.
(9) Remove gasket (13).
(10) Stow all parts on the vehicle deck.
b. To install the exhaust stacks, proceed as follows:
(1) Check gasket (13) for damage. If damaged, replace.
(2) Install gasket (13).
(3) Place exhaust pipe (11) and slip flange (12) on flange.
2-769
|
||
|
||
