3-14.2. FUEL STRAINER - MAINTENANCE INSTRUCTIONS.
A fuel strainer (primary) is used to remove impurities from the fuel. It is located between the fuel supply
tank and the fuel pump, and operates under suction. It consists of two strainer elements. Either element is
selected by a lever located on the front. The selector allows a strainer to be removed and cleaned while the
engine is in operation.
This task covers:
b. Cleaning and Inspection
INITIAL SETUP :
Special Environmental Conditions
Do not drain fuel into bilges.
General Safety Instructions
Use eye protection when using compresse air
a. Place under plug (1).
b. Remove plug (1) and
gasket ( 2).
c. Replace plug and gasket
when fuel has drained out.