| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-4
3-16. LUBRICATING OIL FILTERS - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARK
REPLACING OIL FILTER ELEMENT ASSEMBLY (Cont)
14. Center
a. Nut (5)
Thread onto stud.
stud (4)
b. Gasket (12)
c. Shell (3)
Slide onto stud.
d. Spring (11),
Slide onto stud.
spacer (10),
Return in order.
spring
retainer
(9) and
spring
retainer
gasket (8)
15. Oil
Gasket (7)
Install new gasket.
Remove all
filter
pieces of old
base (13)
gasket from
base and filter'
shell; make
sure all sur-
faces are free
from nicks or
burrs.
16. Stud
Element
Position new element
assembly
(6)
on stud within shell.
17. Oil filter
Stud assem-
Place assembly over
Tighten to 50-
base (13)
bly with
gasket (7) and tight-
60 lb-ft (68-81
element
en stud (4) and nut
Nm) torque.
(1)
nut (5).
18. Bottom of
Drain
Reinstall.
base
plugs (2)
19.
Start engine and run
for short period.
Shut off. Check oil
level in crankcase
after 20 minutes.
Add oil.
20. Rocker
Oil
Add oil.
covers
inlet
3-540
|
||
|
||
