| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-4
3-17. LUBRICATING OIL COOLER - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARK
CLEANING
b. Remove when bubbling
Approximately
stops.
30-60 seconds.
c. Flush thoroughly with
clean, hot water. Dip
core into light oil.
INSTALLATION
10. Cylinder
Adaptor
Install adaptors (25 and
Use new gaskets
block
26) onto cylinder block
(28).
with spacers (27), gaskets
(28), using bolts (23) and
lockwashers (24).
11. Oil filter,
Filters
Re-install per paragraph 3-16.
oil line
.
12. Oil pan
Dipstick
Remove, check oil level.
If necessary, add oil.
13. Engine
Start engine. Run for five
minutes. Check for oil or
water leaks. Stop engine.
Wait twenty minutes for oil
to drain into crankcase. Re-
check oil level with dipstick
and if low, add oil.
14. Oil cooler
Housing
Place housing (1) and gaskets
a. Use new
housing
(1), and
(22) onto studs.
gaskets.
gaskets
(22)
b. Studs in-
stalled in
step (7).
15. Oil coolers
Coolers
Install using bolts (16)
Remove studs
(18 and
and washers (17).
and install
19), gas-
bolts (16) and
kets (20
washers (17).
and 21),
oil cooler
covers (15
and 18)
3-548
|
||
|
||
