3-32.2. OIL BREATHER - MAINTENANCE INSTRUCTIONS.
Harmful vapors which may be formed within the engine are
removed from the crankcase, gear train, and valve compartment
by a continuous pressurized ventilation system.
An oil breather is mounted on the flywheel housing. The breather contains a filter element which traps oil
particles. The oil drains back into the crankcase. The vapor is pulled into the engine air intake through the air
This task covers:
INITIAL SETUP :
Special Environmental Conditions
Gasket kit P/N 5196375
Do not drain oil into bilges.
Use oil/water separation system
to drain bilges.
General Safety Instructions
Use eye protection when using