Quantcast INSTALLATION (Cont) - TM-55-1905-220-14-40515

Custom Search
 
  
 
TM 55-1905-220-14-4
3-34. CYLINDER HEAD-MAINTENANCE INSTRUCTIONS (Cont.).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
a. Fuel
Install.
Refer to para-
injec-
tors
Adjust.
Refer to para-
valve
bridges
c. Rocker
Install.
Refer to para-
arm
bracket
bolts
d. Fuel
Align and connect them to
Tighten to 12-15
pipes
the fuel injectors and
lb-ft (16-20 Nm)
fuel connectors.
CAUTION
Do not. bend the fuel pipes and do not exceed the specified
torque. Excessive tightening will twist or fracture the flared ends
of the fuel pipes and result in leaks. Lubricating oil diluted by
fuel oil can cause serious damage to the engine
e. Injector
1. Set the injector control
control
tube assembly in place
tube
on the cylinder head and
assembly
install the attaching
bolts finger tight.
When positioning the
control tube, be sure
the ball end of each
injector rack control
lever engages the slot
in the corresponding
injector control rack.
With one end of the
control tube, return
the spring hooked
around an injector
rack control lever and
the other end hooked
around a control tube
3-758


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.