Quantcast REASSEMBLY (Cont) - TM-55-1905-220-14-40595

Custom Search
 
  
 
TM 55-1905-220-14-4
3-40.2. CONNECTOR ROD - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
b. Bushing
1. Start a new bushing
(9)
straight into the
bore of the connec-
ting rod, with the
bushing joint at the
top of the rod.
2. Insert installer in
Use installer
bushing, then insert
tool J1513-6,
handle in the instal-
and handle
ler.
tool J1513-2.
3. Drive the bushing in
until the flange of
the installer bottoms
on the connecting rod.
c. Connec-
Turn the connecting rod
ting rod
over in the holder and
(3)
install the second bush-
ing in the same manner.
NOTE
The bushings must withstand an end load of 2000 pounds (907 kg) without moving
after installation.
13. Bushing
a. Connec-
Assemble.
ting rod
(3),
bolts
(4),
bearing
cap (2)
and nuts
(1)
3-838


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.