3-52. HYDROSTARTER RESERVOIR, FILTER, AND SOLENOID - MAINTENANCE INSTRUCTIONS.
a. The reservoir is a rectangular steel tank. The reservoir will hold the entire oil supply for the
hydrostarter system. A breather ventilator cap is at the top of the reservoir. A strainer screen on the inside of
the reservoir filters the fluid flowing to the pump from the supply hose.
b. The supply hose connects at the reservoir bottom. The return hose connects at the top of the reservoir.
c. A suction filter is installed on the suction hose to provide a finer filtration that protects the pump
mechanism. The filter is a stacked element that can be cleaned and reused.
d. A high pressure filter is installed in line with the outlet of the engine-driven charging pump.
Hydrostarter Suction Solenoid
Hydrostarter High Pressure Filter
3-52.1. HYDROSTARTER RESERVOIR - MAINTENANCE INSTRUCTIONS.
This task covers:
INITIAL SETUP :
Special Environmental Condition
Hydraulic fluid (MIL-L-17672
Do not drain oil into bilges.
Use the oil separation/recovery
system to collect used oil.
General Safety Instructions
Observe ALL WARNINGS.