| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-5
3-89.1. CYLINDER HEAD-MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
PRE-INSTALLATION INSPECTION (Cont)
5. Inspect the cylinder
head bolt holes in the
block for accumulation
of water, oil or any foreign
material. Clean the bolt
holes thoroughly and check
for damaged threads.
NOTE
The 3/4" (1.905 cm) diameter cup pipe plug at the front end of the head must be removed prior
to installation to prevent blocking the coolant flow out of the head.
INSTALLATION
NOTE
Never install used compression gaskets or seals.
27.
Engine
a. Compres-
Place on top of each
Use new gas-
block
sion
cylinder liner.
ket.
gaskets (6)
water hole
3-1471
|
||
|
||
