| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-5
3-96.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
13.
Bushing
a. Connec-
ting rod
(3),
bolts
(4),
bearing
cap (2)
and nuts
(1)
Ream the bushings to size, using tool set J1686-03,
as follows:
1. Clamp reaming fixture J1686-9 in a bench
vise.
2. Position sleeve adaptor J1686-13 on the
arbor of the fixture.
3. Place the crankshaft end of the connec-
ting rod on the arbor of the fixture and
tighten the connecting rod cap nuts to
60-70 lb-ft (81-95 Nm) torque (lubrite
nut) or 65-75 lb-ft (88-102 Nm) torque
(plain nut).
4. Slide the front guide bushing J1686-11
(with the pin end facing out in the
fixture.
3-1657
|
||
|
||
