3-135. DISCONNECT CLUTCH - MAINTENANCE INSTRUCTIONS (Continued).
Using a straight edge
and scale, set adjusting
screw (6) to a depth of
2.321 inch (5.895 cm).
The depth is the distance from the ground surface on the raised lever bosses of the clutch flywheel ring (cover) to the
heads of the lever adjusting screw when the clutch is installed and in the engaged position.
The contact points of these adjusting screws should be set at a uniform distance from the underside of the straight
edge. The adjusting screws must be in the same plane within 0.0312 inch (0.0792 cm).