Quantcast REASSEMBLY (Cont) - TM-55-1905-220-14-60335

Custom Search
 
  
 
TM 55-1905-220-14-6
3-139.1. HYDRAULIC PUMP -MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
k. Pocket
Trim the excess length
Use a pocket
seals
of each pocket seal
knife or razor
(33)
so that they are flush
blade.
and
with the edge of the
(34)
thrust plate.
l. Drive
Insert in recess in
gear
shaft end cover.
(28)
m. Shaft
1. Put several drops
end
of oil, or cover
cover
to hold gasket.
(16),
and
2. Carefully line up
gasket
the ten holes.
(32)
This will avoid
tearing of the
screw holes.
n. Housing
1. Store both faces
It may be neces-
(30)
of housing and
sary to tap the
air blow or wipe
housing lightly
clean.
with a soft ham-
mer to make it
fit over the
thrust plate (31).
2. Press housing onto
the shaft end cover
(16).
o. Driven
Insert into housing.
gear
(29)
p. Port
Store the face of the
end
cover and air blow or
cover
wipe clean.
(22)
q. Roller
Insert into cover.
Use an arbor
bearing
press.
(27)
3-2302


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.