| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
3-144. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
NOTE
The fuel pump and fresh water pump can be installed onto the
blower prior to reassembly.
8.
Blower
NOTE
Before attaching the blower to the engine, check the inside of
the blower for any foreign material and revolve the rotors by
hand to be sure they turn freely.
a. Gasket
Affix to engine block.
Use a new gas-
(16)
ket. Affix
with Scotch
Grip Rubber
Adhesive #4300
or equivalent.
b. Blower
Place on drive shaft
Use a new seal
drive
cover (14).
and clamp.
seal
(15),
and
packing
clamp
(9)
c.
Fresh
Install on blower.
Refer to para-
water
graph 3-150.
pump
d. Fuel
Install on blower.
Refer to para-
pump
graph 3-145.
e. Blower
Place into position
Do not move
(13)
against cylinder block.
blower gasket.
f.
Screws
Install.
Torque to 55-
(11),
60 lb. ft. (74.
and
58- 81.36 Nm)
flat
washers
(12)
3-2446
|
||
|
||
