Quantcast SERVICE (Cont) - TM-55-1905-220-14-60547

Custom Search
 
  
 
TM 55-1905-220-14-6
3-148.1. LUBE OIL FILTER (FULL FLOW) - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
SERVICE (Cont)
c.
Filter
Remove from shell (3).
Discard and dis-
element
pose of properly.
(6)
Wear protective eye goggles when using compressed air.
d. Shell
Clean with clean fuel
Dry with com-
(3)
oil. pressed air.
e. Filter
Position filter element
element
(6) over center stud (2),
and within shell (3).
f.
Oil
1. Insert shell (3) onto
cooler
oil cooler adaptor (4).
adaptor
2. Tighten center stud
Torque to 50-
(2).
60 ft. lb.
(67.8-81.3 Nm).
g. Oil
Install pipe plug (1).
Start and run
filter
engine for a
short period of
time. Check
for oil leaks.
Stop engine for
10 minutes and
check oil level.
Add sufficient
oil to bring
level up to
full on the
dipstick.
3-2518


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.