3-165.1. VALVE INJECTOR MECHANISM - MAINTENANCE INSTRUCTIONS (Continued).
d. Position the cam follower body in the
groove of the fixture, with the small
plunger extending through the roller pin
hole in lower leg of the follower body.
e. Position new cam roller in cam follower
body. When released, the plunger will
extend into the roller bushing and align
the roller with the cam follower body.
f. Start the new pin in the cam follower body.
Carefully tap it in until it is centered
in the cam follower body.
g. Remove cam follower from fixture and check
the side clearance. The clearance must be
.015 to .023 inch (0.038 to 0.058 cm).