| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-7
3-171.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
b. Ream the bushings to size, using tool
set J1686-03, as follows:
1. Clamp reaming fixture J1686-9 in
a bench vise.
2. Position sleeve adapter J1686-13
on the arbor of the fixture.
3. Place the crankshaft end of the
connecting rod on the arbor of
the fixture and tighten the con-
necting rod cap nuts to 60-70
lb-ft (81-95 Nm) torque (Lubrite
nut) or 65-75 lb-ft (88-102 Nm)
torque (plain nut).
4. Slide the front guide bushing
J1686-11, (with the pin end
facing out) into the fixture.
3-2911
|
||
|
||
