| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-7
3-171.4. CYLINDER LINER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
NOTE
The numbers on the side of the connecting rod and cap identify
the rod with the cap and indicates the particular cylinder in which
they are used. If a new service connecting rod is to be installed,
the same identification numbers must be stamped in the same
location as on the connecting rod that was replaced.
2. Push piston and connecting
rod assembly down into the
liner until the piston is
free of the ring compressor.
CAUTlON
Do not force the piston into the liner. The peripheral abutment
type expanders apply considerable more force on the oil ring
than the standard expander. Therefore, extra care must be
taken during the loading operation to prevent ring breakage.
g. Connecting
1. Remove.
rod
cap
2. Push piston down until
and
the compression rings
ring
pass cylinder liner ports.
3-2941
|
||
|
||
