| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-8
4-5. GENERAL (Continued).
Table 4-22. Washer/Dryer Troubleshooting (Continued.)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 5. Agitate clutch slipping.
Check agitate clutch for oscillation.
Adjust if necessary.
Step 6. Agitate clutch hub loose on tub support shaft.
Check tub support shaft for oscillation. Tighten
clutch hub to shaft as required.
Step 7. Tub support loose on tub support shaft.
Check tub retaining rod and tighten as necessary.
Step 8. Won't spin - motor operating (may continue to agitate).
Check for driver secure on motor shaft. Tighten
as necessary.
Step 9. Driver slipping on motor shaft - spin roller
binding - not free to move.
Check driver driving spin roller.
Clean, adjust or replace spin roller as necessary.
Step 10. Spin wheel and clutch assembly stuck or not
rotating/or spin roller not engaging spin wheel.
Check spin roller driving spin wheel and clutch assembly.
Adjust or replace spin roller or spin wheel and
clutch assembly as necessary.
Step 11. Cams sticking.
Tap agitate clutch and rotate agi-tub in counter-
clockwise direction to free cams.
'
Check for cam engagement and spin clutch camming
up going into spin. Replace spin wheel and clutch
assembly or agitate cam as necessary.
4-69
|
||
|
||
