| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-8
4-5. GENERAL (Continued).
Table 4-22. Washer/Dryer Troubleshooting (Continued).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
19. Improper drying temperature.
Step 1 . Fabric selector switch.
Check to assure switch is wired properly and all
connections are tight. Check continuity through
switch. Correct as necessary.
Step 2. Heat control thermostat.
Check cut-out and cut-in temperatures with oven
tester. If improper, replace thermostat.
Step 3. Safety limiter thermostat.
Check cut-out and cut-in temperatures with oven
tester.
Step 4. Poor air circulation.
Check lint screen.
Check for overloaded drum.
Check for lint clogged blower or blocked exhaust
duct.
20. Drying time too long or clothes not dry when removed from drum.
Step 1. Lint screen.
Check lint screen for lint collection and proper
assembly. Instruct user.
Step 2. Drum seal.
Check the felt seals and retaining bands located at
either edge of the drum for proper-positioning.
Correct as necessary.
4-77
|
||
|
||
