| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-8
4-10.2. LUBE OIL PUMP - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
h. Lockwasher
Install.
(10), and
locknut (11)
i.
Bolt (12),
Reassemble and
a. Use new gas-
gasket
tighten.
ket.
(13), and
clamp nut
b. Tighten to
(14)
60 inch
pounds (6.78
Nm).
j.
Back head
1. Raise liquid end of
bushing
pump to cause the
(30), and
bushing to be
setscrews
visible through
(26)
elbow mounting hole.
2. Rotate shaft until
setscrew is visible.
3. Using an Allen
wrench tighten set-
screws.
4. Rotate shaft and
tighten second
setscrews.
k.
Elbow (25),
Reinstall.
and tube
connector
(24)
l.
Nuts (21)
Carefully tighten.
m. Relief
Reassemble.
Use new gaskets.
valve (2),
gasket
(3), and
screws (1)
Do not run pump dry. Be sure to prime. Refer to paragraph 4-10.1.
4-512
|
||
|
||
