| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-9
4-46.3. CYLINDER ASSEMBLIES - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
3. Insure that the
safety lock pin is
properly installed.
4. Insure that the
safety lock wire is
installed.
d. Cylinders
1. Inspect for signs
installed
of damage.
2. Perform weight
See step 4.
test.
3. Insure that the
anti-recoil plug
and protective cap
are firmly attached
to the cylinder valve.
REPLACE
Do not install new cylinder until indicator and
reset stem (8) on control head (4) has been set
to position, SET.
2. Cylinder,
a. Cylinder
Disconnect pipe (2)
valve,
valve (1)
at discharge outlet.
and
control
b. Anti-recoil
Attach to discharge
head
plug (3)
outlet.
assembly
(aft and
fwd engine
rooms)
Change 1
4-1162
|
||
|
||
