| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-1
c.
Emerqencv Starting.
The outboard engine of each propulsion unit has an electric starter and each inboard engine has a hydraulic
starter. If either the electric system or the hydraulic system should fail, one engine of a propulsion unit can be used to
start the other by using engine control lever to actuate the clutches.
d. Starting Enqine with Enqine Room Controls.
Engines can be started and operated using the controls In the engine room. Refer to figures 2-4 through 2-6.
2-6.
STOPPING THE LCM.
a. Place engine control levers (1) in NEUTRAL position.
b. Allow engines to run at half speed or lower for five minutes.
Regulate speed with neutral throttles (2).
c. Push neutral throttle controls (2) in.
d. Pull engine stop control (3) handles out the full length of their travel and hold them out until the engines stop.
2-7.
OPERATION OF LANDING CRAFT.
a. Normal Operation.
(1) Move engine control levers (26, fig. 2-1) to shift into forward or reverse and to control engine speed.
(2) Turn steering wheel (24, fig. 2-1) to change the course of the landing craft.
2-50
|
||
|
||
