Custom Search
 
  
 
TM 55-1905-221-14-1
4-27. RAMP HOISTING ASSEMBLY (Continued).
Location/Item
Action
Remarks
INSPECTION
1. Reservoir
a. Inspect reservoirs for leaks,
cracks or other damage.
b. Inspect for leaks at piping
leading to and from reservoir.
Report any defects to your
supervisor.
2. Filters
a. Check the filters condition
(Return Line)
indicator to see if it is
reading in the RED. If
indicator is in the RED,
replace filter.
b. Check the filter body for
dents, cracks, or other
damage. Report any defects
to your supervisor.
3. Suction
a. Check the vacuum indicator to
Strainer
see if it shows a red sleeve.
A red sleeve means that the
elements must be cleaned.
b. Check strainer for breaks,
leaks, cracks or other damage.
Report any defects to your
supervisor.
4. Suction Screen
a. Drain fluid from reservoir
into a suitable container and
remove the top.
b. Check suction screen attached
to the suction lines near
bottom of reservior.
5. Ramp Hoist
Check pumps which are direct
Hydraulic
driven by front power take-off
Pumps
on the outboard engine of each
propulsion unit for any leaks,
breaks or other damage. Report
any defects to your supervisor.
4-79


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business