| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-12.1.
ALTERNATOR (Continued)
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
NOTE
It is not necessary to remove grease seal (unless it is damaged.).
d.
If necessary, remove grease
seal (23) by tapping on the
seal through opening in the
rear housing (16) with a flat-
face punch.
e.
Remove front ball bearing
Use bearing
(24) from rotor shaft.
puller.
f.
Remove grease seal (25),
retainer gasket (26), and
bearing retainer (27) from
front housing.
g.
Remove hex socket screw
Discard lock-
(28), and lockwasher (29).
washer.
h.
Unsolder two connections
on slip rings (15).
NOTE
Do not damage the fiber washer between the rings or break 'the wires.
i.
Thread a 1/4-28 x 1 1/4 inch
machine screw into the end
of the shaft (slip ring end).
As screw is tightened, slip
rings will back off shaft.
j.
Remove bearing retainer (30).
k.
Remove ball bearing (31)
Use bearing
from rotor shaft (22).
puller.
5-164
|
||
|
||
