| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-30.
TRANSMISSION CO NTROL VALVE (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
8.
Selector
a.
Lubricate selector valve
Valve
(21) with clean engine
oil.
b.
Start locating screw slot
end of selector valve
(21) straight into
housing (36) with locating
screw hole in right-hand
side of housing.
c.
Slide selector valve
(21) in housing (36)
until slot in valve is
in line with locating
screw hole.
d.
Place washer (4) over
Torque screw to
end of locating screw
13-17 lb. ft.
(3), and install screw in
(17.6-23.0 Nm).
housing with end of screw
registering with slot in
valve.
e.
Place housing in a vertical
position with lever end
of valve facing up.
f.
Apply a thin coat of
sealing compound to
outside diameter of oil
seal (20).
g.
Place oil seal over end
of selector valve (21)
with lip of seal facing
housing.
h.
Start oil seal (20)
straight into housing
(36).
5-556
|
||
|
||
