| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-11.
MOTOR, HYDRAULIC, RAMP WINCH (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Hydraulic
Lines
The fluid pressure in the system must be released
prior to servicing the motor or other parts to
prevent possible injury to personnel or equipment.
a. Loosen hydraulic lines
Drain lines
slowly to relieve
into a suitable
pressure.
container.
b. Disconnect hydraulic lines
Cap open ends.
(1 and 2) from motor.
2. Motor
a. Remove four capscrews (3)
and lockwashers (4)
securing motor.
b. Remove motor (5) and
Discard gasket.
mounting gasket (6).
c.
Remove key (7) from gear
shaft (8).
6-107
|
||
|
||
