Custom Search
 
  
 
TM 55-1905-221-14-3
6-23.3. CAMSHAFT AND BALANCE SHAFT - M AINTENANCE INSTRUCTIONS
(Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION - FLYWHEEL HOUSING AND MARINE GEAR REMOVED (Cont)
c.
Secure the camshaft gear bearing
(15) to the cylinder block with
the three screws (8), and lock-
washers (9). The camshaft gear
may be turned to accommodate the
screws through the hole in the
gear web. Tighten the screws to
35-40 lb-ft (47.5-54.2 Nm) torque.
d. Insert the balance shaft (32) into
the bore in the cylinder block and
push it in until the teeth of the
balance shaft gear almost engage
the camshaft gear teeth.
e. Align the timing marks on the
mating gears and slide the balance
shaft gear into place.
f.
Secure the balance shaft rear
bearing (29) to the cylinder block
with the three screws (22), and
lockwashers (23). The balance
shaft gear may be turned to
accommodate the screws through the
hole in the gear web. Tighten the
screws to 35-40 lb-ft (47.5-54.2
Nm) torque.
6-357


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business