| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-27.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
(3)
Place the crankshaft
end of the connecting
rod on the arbor of
the fixture and
tighten the connec-
ting rod cap nuts to
60-70 lb-ft (81-95
Nm) torque (lubrite
nut) or 65-75 lb-ft
(88-102 Nm) torque
(plain nut).
(4)
Slide the front
guide bushing
J1686-11 (with the
pin end facing out
in the fixture).
(5)
Align the upper end
of the connecting
rod with the hole
in the reaming
fixture.
(6)
Install the rear
guide bushing
J1686-5 on reamer
J1686-20, then slide
the reamer and
bushing into the
fixture.
6-450
|
||
|
||
