| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-29. CYLINDER BLOCK - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSPECT (Cont)
e. Fit the liner to the
cylinder block:
The liner-to-block
clearance with new
parts is zero to .002
inch. With used
parts, the maximum
liner-to-block
clearance is .0025
inch. Examine the
block bore measure-
ments to determine
if standard or .001
inch oversize O.D.
liners can be used,
or if the cylinder
block should be
bored oversize. A
light push fit
between the liner
and the block is
desirable. However,
a good fit between
the cylinder liner
and block may be
obtained by comparing
the average bore
sizes in Table below.
For Average
Use Liner
To Give
Block Bore
A Liner-to-
I.D. Size of
O.D. Size
Block Clearance of
4.6260 inches
Standard
.000 inch to .0025 inch
4.6275 inches
4.6270 inches
.001 inch Oversize
.000 inch to .0025 inch
4.6285 inches
6-532
|
||
|
||
