TM 55-1905-221-14-4
6-31. FUEL INJECTORS (Continued).
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
WARNING
Wear protective eye goggles when using compressed air to prevent eye injury.
f. Purge filters after
installation by directing
compressed air or fuel
through the filter
caps.
g. Install shipping caps
(5) on all openings
to prevent any dirt
particles from entering
injector.
11. Control Rack
and Gear
NOTE
Observe the two marked teeth when looking into the bore of the gear from the
bottom side of the injector body.
6-580