Custom Search
 
  
 
TM 55-1905-221-14-4
6-33. RAW WATER PUMP (Continued).
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
d. Pull seal (5) from shaft.
Discard seal.
e. Remove flatwasher (6) and
packing (7) in a similar
manner.
f. Scribe a mark on body (11) and
adaptor (10) for reference when
reassembling.
g. Remove cap screws (8) and lock-
washers (9) from pump body (11).
h. Separate adapter (10) from pump
body ( 11 ).
i. Remove gasket (12).
Discard.
j. Clamp drive gear (15) in a
soft-jawed vise.
k. Remove locknut (13) and lock-
washer (14) from pump shaft.
l. Remove gear from vise and,
using a suitable gear puller,
pull gear (15) from shaft.
m. Remove woodruff key (16) from
Discard key.
shaft.
n. Remove plain seal (17) from
Discard seal.
pump body (11).
o. Place pump body in arbor press
with mounting flange resting
on bed of press and splined
end of shaft under ram of
press.
p. Press shaft and ball bearing
Use a brass rod
from pump body (11).
between shaft
and ram.
6-596


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business