| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-38. TRANSFER GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
2.
Place two strips of
wood on bed of press
directly under each
edge of drive gear
to protect the teeth
of gear when shaft
is pressed out of
the bearing.
3.
Bring ram of press
down on end of power
drive shaft, and
force drive shaft
from the bearing.
4.
Reverse the drive
shaft and drive gear
on bed of press and
remove the second
bearing in the same
manner.
WARNING
Be very careful when pressing the drive gear from the bearings, not to allow the gear and shaft
assembly to fall from the steel supports. Injury to personnel or damage to parts may occur if
gear and shaft assembly are allowed to fall .
6-803
|
||
|
||
