| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-38. TRANSFER GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
g. Install the gear housing to Four bolts (26)
the adaptor plate bolts (26, 3/8-16 X 4-1/2
28, and 30) with lockwashers
inch. Four
(27, 29, 31). Tighten the bolts (28)
bolts to 30-35 ft-lb (40.7- 3/8-16 X 5 inch.
47.5 Nm).
Sixteen bolts
(30) 3/8-16 X
1-1/4 inch.
h. Remove the sling, chain
hoist and eyebolts from
transfer gear housing.
i. Attach a sling and chain
hoist to the lifting
bracket at the top of each
engine flywheel housing.
Lift the rear of the
engines just enough to
permit the removal
of the blocking from
beneath the flywheel
housings.
6-824
|
||
|
||
