| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
f. Clamp a board across the
face of the reverse gear
housing with a one inch
wood block at each end
between the board and the
clutch drive plate (11).
g. Remove retaining ring (13) Use a screw-
from the groove in the driver.
housing.
h. Remove the clamps, board,
and wood blocks from the
reverse gear.
i. Thread a piston remover Use tool J4746
tool into each of two tapped (T-head bolt).
holes in the forward face
of the reverse clutch drive
plate (11).
6-843
|
||
|
||
