| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Cont)
p. While supporting the
flywheel and piston,
continue to turn
the bolts in EVENLY
until the peripher of
the piston with seal
ring is free of the
flywheel. Then, lift
the piston away from the
flywheel.
CAUTION
The piston must be forced EVENLY out of the flywheel to prevent damage
occurring to the seal rings in the piston and the flywheel.
q. Remove the three 1/2
inch-13 X 2-1/4 inch
bolts from the flywheel
that were used to remove
the piston from the
flywheel. Then support
the flywheel on two wood
blocks, with the ring
gear side of the flywheel
facing down.
6-858
|
||
|
||
