Custom Search
 
  
 
TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
f. Start the oil seal (53)
straight into the bore of
the flywheel, and tap it
down against the oil seal
retaining ring (54).
CAUTION
When installing the oil seal, use care not to drive too hard against oil seal retaining ring or
damage to the thin flange of the retaining ring groove may occur.
g. Install the emergency engage-
ment bolts (50) with a jam
nut (51) on each bolt, in the
tapped holes in the forward
face of the flywheel.
Tighten the bolts securely
against the jam nuts.
NOTE
The jam nuts serve as spacers to prevent the emergency engagement bolts from contacting the
forward piston during normal operation.
6-871


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business