| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
h. Install the forward clutch
If removed,
piston drive pins (62) in
perform steps
the flywheel.
i through l.
If not removed,
proceed to step
m.
i. Support the flywheel on wood
blocks with the forward (ring
gear) side down.
j. Note the scribe marks placed
on the flywheel at the time
the old pins were removed.
Start a drive pin in each of
the drive pin holes in the
rear face of the flywheel,
with the square head of the
drive pin in line with the
scribe mark.
k. With a soft (lead) hammer,
drive the pins straight into
the flywheel until the head
of the pins contact the
surface of the flywheel.
6-872
|
||
|
||
