| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
f. With the drive shafts (6)
entered into the hubs of the
clutch plates (3), continue
to push the assembly forward
and pilot the drive shafts
straight into the pilot
bearings, then enter the
pilot on the reverse gear
housings straight into the
flywheel housing.
NOTE
If the sun gear does not readily enter the forward clutch drive plates, rotate the
drive shafts very slowly until the sun gears enter the drive plates.
g. Install the screws (20) and
lockwashers (21) securing
the reverse gear housings to
the flywheel housings.
Tighten the bolts to 30-35
ft-lb (40.7-47.5 Nm) torque.
h. Install the power transfer
gear assembly (paragraph 3-42).
6-904
|
||
|
||
