| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-40. FLYWHEEL HOUSING - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
e. If the run-out exceeds
the maximum limits,
remove the flywheel
housing and check
for dirt or foreign
material, such as old
gasket material,
between the end plate,
flywheel housing and
the new gasket end
plate, flywheel
housing and the new
gasket (and between
the end plate and the
cylinder block).
f. Reinstall the flywheel
housing and the
flywheel and tighten
the attaching bolts in
the proper sequence
and to the specified
torque. Then recheck
the run-out. If
necessary, replace the
flywheel housing.
8. Lifter
a. Remove screws (17),
Bracket (3)
lockwashers (18), and
bracket (3) from
flywheel housing.
b. Remove gasket (19).
Discard gasket.
c. Affix new gasket (19)
to bracket.
6-917
|
||
|
||
