TM 55-1905-221-14-4
6-41. POWER TAKE OFF COUPLING AND VIBRATION DAMPER (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Cont)
k. Attach a bar type
puller J4558 to the
vibration damper hub
(13) with two long
7/16"-20 bolts, with
the center screw of
the puller in the
center of the bolt (7)
head in the crankshaft
as shown below.
l. Turn the center screw
and pull the vibration
damper hub (13),
vibration dampers (14
and 15), and front
vibration damper hub
cone (16) forward
on the crankshaft
approximately one
quarter of an inch
as shown. Remove the
puller from the
vibration damper
hub (13).
6-924
|
|