| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
4-8 REPLACE SEARCHLIGHT BULB, REFLECTOR, GLASS AND FIXTURE (Continued).
c.
Disconnect power cable (7) at rear of light assembly.
d.
Remove screws (8) from the control yoke assembly.
e.
Remove screws (9) from main yoke assembly.
f.
Remove searchlight (10).
INSTALLATION
INSTALL SEARCHLIGHT.
a.
Install searchlight (10).
b.
Install screws (9) to main yoke assembly.
c.
Install screws (8) to control yoke assembly.
d.
Connect power cable (7) at rear of light assembly.
e.
Install sealed beam light (6), install retaining ring
(5), and tighten three screws (4).
f.
Install lens glass (3), install retaining ring (2), and
tighten three screws (1).
4-19
|
||
|
||
