REPLACE PROPULSION CONTROL HEAD

Custom Search

REPLACE WINDSHIELD WIPERS AND WIPER MOTOR

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

INSTALLATION

TM 55-1905-222-14

MAINTENANCE OF PROPULSION CONTROL AND LINKAGE

4-22

REPLACE PROPULSION CONTROL HEAD.

This task covers:

a. Removal c. Test

b. Installation

INITIAL SETUP

Tools:

Equipment Conditions:

Tool Kit, Mechanic's, Rail

Engine shut down

and Marine

Materials/Parts:

Control Head

P/N 2048-M

REMOVAL

REMOVE PROPULSION CONTROLS

Remove access plate in pilothouse control

console.

Disconnect four cables (1) from clevis (2) by

loosening jam nut (3). Remove screws (4),

clamps (5) and cable connector (6).

Remove two screws (7) from dome (8) and

remove dome.

Remove

four screws (9),

nuts (10),

lockwashers (11) and washers (12) from the

frame (13).

Pull

propulsion

control

head assembly

through the top of the control console.

Remove gasket (14).

Remove three Phillips screws (15) from

retainer (16). Remove retainer (16).

4-43