Custom Search
 
  
 
TM 55-1905-222-14
5-21
REPLACE RAMP LOCKING HYDRAULIC CYLINDERS (Continued).
d.
Remove access cover plate from other side of
hull in a similar manner, if necessary.
e.
Disconnect hydraulic line (4) from cylinder (5)
Cap hydraulic line.
f.
Remove clevis pin (6) and clevis (7).
g.
Remove  mounting
bolts (8) and hydraulic
cylinder (5).
INSTALLATION
INSTALL RAMP LOCKING CYLINDER.
a.
Position hydraulic cylinder (5) in place, and
install mounting bolts (8).
b.
Install clevis (7) and clevis pin (6).
c.
Re-connect
hydraulic
line
(4). Remove
end caps.
d.
Position new gasket (3) in place on cover plate
(2).
e.
Install cover plate (2) to hull, using twenty
screws (1).
f.
Install other cover plate if removed in a similar
manner.
g.
Bleed hydraulic lines and cylinder of air before
putting ramp into operation.
5-49


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business