| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
5-37 REPLACE RUDDER (Continued).
2.
REMOVE TIE ROD AND CYLINDER
ASSEMBLY
a. Remove clevis pin and disconnect clevis (12)
from end of tie rod (13)
b. Remove tie rod (13)
c. Remove clevis pin and disconnect clevis (14)
from end of hydraulic cylinder Remove cylinder
assembly (15)
d. Disconnect the universal rudder clamp (16) of
rudder angle transmitter (7) from the rudder stock
(18).
3.
REMOVE RUDDER STOCK
a. Remove nuts (19), washers (20), and bolts (21)
from crank assembly.
b. Remove crank assembly (22) from upper rudder
stock (18).
c. Remove cotter pin (23) and nut (24), from upper
rudder stock.
d. Remove flange mounting nuts (25), lockwashers
(26), and capscrews (27).
e. Separate lower thrust flange (28), upper thrust
flange (29), and thrust bearing (30).
f. Remove stuffing box mounting nuts (31),
capscrews (32), gasket (33), from stuffing box
(34).
g. Remove packing gland jam nuts (35), hex nuts
(36), studs (37) from packing gland (38).
h. Remove packing gland (38) and stuffing box (34).
l. Remove flax packing (39) from stuffing box (34)
Discard packing.
5-93
|
||
|
||
