| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
6-17 REPAIR RECHARGING PUMP (Continued).
2. INSPECT DRIVE COMPONENTS
a. Inspect intermediate drive for
cracks and wear, replace as
necessary
b. Inspect flange assembly
for
cracks,
wear
and
damaged
threads, replace as necessary
c Inspect oil seal for physical damage,
replace as necessary.
d. Inspect pipe plug and setscrew for
thread
damage;
replace
as
necessary
ASSEMBLY
1. ASSEMBLE PUMP
a. Press needle bearing (48) into
pump housing (12), if it has been
removed.
b. Install two piston retaining rings
(44) on piston (43). Be sure rings
do not overlap each other. Put a
light coat of grease on piston (43)
and slide piston (43) with retaining
rings (44) into sleeve (49). (Bleed
hole in piston must be facing the
inlet).
c. Install needle bearing (41) and
washer (42) on drive shaft (9) and
then install drive shaft (9) into
pump housing (12) Ensure that
drive shaft enters needle bearing
(48) freely
6-91
|
||
|
||
