Remove two hexagon head capscrews (16), lockwashers (15), and washers (14).
Remove the instrument panel bracket (10).
Repair to the instrument panel assembly will be only the replacement of
defective gauges, meters, switches, circuit breaker, wiring harness, and
light. Replace components which are defective or not working. Replace
damaged or frayed wiring harnesses.
Loosen the two pinhead screws (1) in the upper corners of the front panel (2) and swing the panel
Disconnect and remove wiring harnesses (23, 24, 26).
Disconnect and remove electrical coil (21).
Disconnect and remove thermocoupler (22).
Remove circuit breaker (37).
Remove air control valves (38).
Remove power toggle switch (39).
Remove pressure switches (25, 27).
Remove remote start toggle switch (30).
Remove pyrometer (29).
Remove lube filter gauge (36).
Remove tachometer/hourmeter (31).
Remove engine water gauge (32).
Remove engine oil pressure gauge (33).
Remove engine oil temperature gauge (34).
Remove indicator light (35).
Remove start air gauge (28).