Quantcast ASSEMBLY - continued - TM-55-1905-223-24-10196

Custom Search
 
  

 
TM 55-1905-223-24-1
WARNING
Parts are under spring pressure.  The parts can move
suddenly with enough force to cause personal injury. Use a
tool that will control the parts firmly.
NOTE
Ensure the plunger moves freely in the housing.  If the
plunger does not move freely, check again for debris or
burrs on the part and assembly.
k. Lubricate preformed packing (51) and valve piston (53) with clean engine lube oil. Install valve piston
(53), spring (52), preformed packing (51) and fluid valve stem (50).
1. Install shouldered washer (49), lockwasher (48) and hexagon head capscrew (47). Tighten to 35 ft-lb
(40 N ).
m
WARNING
Parts are under spring pressure.  The parts can move
suddenly with enough force to cause personal injury. Use a
tool that will control the parts firmly.
NOTE
Ensure the plunger moves freely in the housing.  If the
plunger does not move freely, check again for debris or
burrs on the part and assembly.
m. Lubricate detent plunger (34) with clean engine lube oil. Install valve (35), detent plunger (34),
spring (33), lube oil filter cover gasket (32) and access cover (31).
n. Install lockwashers (28) and hexagon head capscrews (29). Tighten to 30 ft-lb (40 Nm).
O. Install pipe plug (30).
WARNING
Parts are under spring pressure.  The parts can move
suddenly with enough force to cause personal injury. Use a
tool that will control the parts firmly.
NOTE
Ensure the plunger (21) moves freely in the housing. If the
plunger does not move freely, check again for debris or
burrs on the part and assembly.
3-30


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business