2-26. Repair Bleach Tank Assembly.
This task covers:
Tool kit, general mechanic's
Electrical power OFF and tagged
to the sanitary unit
Bleach tank assembly P/N 3700019
Container, 10 gl, closable
(for draining old tank)
Warning tags, Item 10, Appendix C
Bleach, Item 13, Appendix C
Inspection and service on the bleach tank assembly is accomplished through PMCS.
The bleach tank is located separately from the sanitary main
unit. A 1/4-inch gravity feed line is attached from the tank to the
metering valve on the unit (3, FIGURE 2-24).
a. Close the metering valve on the main unit by turning clockwise.
b. Remove the fill plug (2, FIGURE 2-26) from the adapter (1) in the tank (3).
Avoid splashing bleach in eyes when disconnecting lines.
Disconnect the bleach line (7, FIGURE 2-24) at the metering valve connection (5), and drain the bleach
from the tank into a portable