e Column 5 - Tools and Equipment. Column 5 specifies, by number code, those common tool sets
(not individual tools); special tools; Test, Measurement, and Diagnostic Equipment (TMDE); and
support equipment required to perform the designated function, which shall be keyed to the tools listed
in Section III.
f Column 6 - Remarks. This column shall, when applicable, contain a letter code, in alphabetic order,
which shall be keyed to the remarks contained in Section IV.
B-4 EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS,
a Column I - Reference Code. The tool and test equipment reference code correlates with a number
code used in the MAC, Section II, Column 5.
b Column 2 - Maintenance Category. The lowest category of maintenance authorized to use the tool
or test equipment.
c Column 3 - Nomenclature. Name or identification of the tool or test equipment.
d Column 4 - National Stock Number. The National stock number (NSN) of the tool or test
e Column 5 - Tool Number. The manufacturer's part number.
B-5 EXPLANATION OF COLUMNS IN REMARKS, SECTION IV.
a Column 1- Reference Code. The letter code recorded in Column 6, Section II.
b Column 2 - Remarks. This column lists information pertinent to the maintenance function being
performed as indicated in the MAC, Section II.