REPAIR - TM-55-1905-223-24-160044

Custom Search

FIGURE 2-5. Hydraulic Valve

TM-55-1905-223-24-16 Stern Anchor Winch for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

Replace Hydraulic Motor Assembly.

TM 55-1905-223-24-16

(3) Disconnect failsafe brake pressure line connector (5).

b. Remove Hydraulic Valve.

(1) Remove two mounting bolts (7) securing valve to base plate.

(2) Remove hydraulic valve (4).

(3) Remove two cartridges (6) from hydraulic valve (4).

REPAIR

Repair consists of replacing hydraulic valve cartridge (6).

REPLACEMENT

a. Install Hydraulic Valve.

(1) Replace two cartridges into hydraulic valve (4).

(2) Position hydraulic valve (4) over mounting boltholes on base plate.

(3) Install two mounting bolts (7) through boltholes on valve assembly and secure valve to base plate.

NOTE

Remove protective caps/plugs from hydraulic lines prior to installation.

b. Connect Hydraulic Line/Hose Connectors.

(1) Connect failsafe brake pressure line connector (5).

(2) Connect hydraulic hose connectors (3 and 8).

(3) Connect hydraulic line connectors (1 and 2).

2-28